Galvanic Applied Sciences 943-TGS-CE, Operation Manual

Page: 49 / 158

Revision 5 49 August 2021
Section 4
Local System Control
4.1 Overview
The operator can locally control the analyzer via the full colour, multi-page display mounted in
the control cabinet in conjunction with the hand-held keypad that can be connected to a USB
port on the outer right wall of the control cabinet. The keypad, in conjunction with the local
display, can be used to view a variety of analysis and status information, as well as to make
changes to some analyzer operational parameters.
4.2 Using the Local Display and Handheld Keypad
4.2.1 Local Display User Interface
The local display user interface consists of a series of panels which are accessed via tabs
at the top of the screen. The different panels of the local display user interface display a
variety of different information and are described in sections 4.3 to 4.8 of this manual. The
local display as it appears when the Analysis 1 panel is active is shown in Figure 20.
Figure 20: Local Display User Interface