Galeo PC600-7, Operation & Maintenance Manual

Page: 34 / 299

SAFETY
SAFETY INFORMATION
2-17
ACTION IF FIRE OCCURS
If a fire occurs, escape from the machine as follows.
q
Turn the start switch OFF to stop the engine.
q
Use the handrails and steps to get off the machine.
WINDSHIELD WASHER FLUID
Use an ethyl alcohol base washer liquid.
Methyl alcohol base washer liquid may irritate your eyes, so do not use it.
FALLING OBJECTS, FLYING OBJECTS AND INTRUDING OBJECTS PREVENTION
On jobsites where there is a hazard that falling objects, flying
objects, or intruding objects may hit or enter the operator's cab,
consider the operating conditions and install the necessary
guards to protect the operator.
q
When carrying out demolition or breaker operations, install a
front guard and use a laminated coating sheet on the front
glass.
q
When working in mines or quarries where there is a hazard of
falling rock, install FOPS (Falling Objects Protective Struc-
ture) and a front guard, and use a laminated coating sheet on
the front glass.
q
When carrying out the above operations, always close the
front window. In addition, always ensure that by standers are
a safe distance away and are not in hazard from falling or fly-
ing objects.
q
The above recommendations assume that the conditions are
for standard operations, but it may be necessary to add addi-
tional guards according to the operating conditions on the job-
site. Always contact your Komatsu distributor for advice.
ATTACHMENT INSTALLATION
q
When installing optional parts or attachments, there may be problems with safety or legal restrictions. There-
fore contact your Komatsu distributor for advice.
q
Any injuries, accidents, or product failures resulting from the use of unauthorized attachments or parts will not
be the responsibility of Komatsu.
q
When installing and using optional attachments, read the instruction manual for the attachment, and the gen-
eral information related to attachments in this manual.
ATTACHMENT COMBINATIONS
Depending on the type or combination of work equipment, there is a hazard that the work equipment may hit the
cab or other parts of the machine. Before using unfamiliar work equipment, check if there is any hazard of interfer-
ence, and operate with caution.