MAINTENANCE
MAINTENANCE PROCEDURE
4-63
CHANGE OIL IN SWING MACHINERY CASE
4
WARNING
The parts and oil are at high temperature immediately after the engine is stopped, and may cause serious
burns. Wait for the temperature to go down before starting the operation.
q
Refill capacity: Each 13 liters (3.4 US gal)
1. Set a container under drain hose under the machine body to
catch the oil.
2. Loosen drain valve (P) under the machine body, drain the oil,
then tighten the drain plug again.
3. Remove dipstick (G) and air bleding plug (1), then add the
specified amount of engine oil through filler port (F) of the dip-
stick guide.
4. After adding oil, install air bleed plug (1).
5. Wipe off the oil on the dipstick with a cloth.
6. Insert dipstick (G) fully in the oil filler pipe, then take it out
again.
7. The oil level should be between H and L marks on the dipstick
(G). If the oil does not reach the L mark, add engine oil
through oil filler port (F).
8. If the oil is above the H mark, drain the excess engine oil from
drain valve (P), and check the oil level again.
9. Immediately after changing the oil, oil level is variable.
So operate for one hour, then check the oil level again.
Summary of Contents for PC600-7
