OPERATION
MACHINE OPERATIONS AND CONTROLS
3-91
Starting Engine In Cold Weather
3
WARNING
q
Start the engine only after sitting down in the operator's seat.
q
Do not attempt to start the engine by short-circuiting the engine starting circuit. Such an act may
cause a serious bodily injury or fire.
q
Check that there are no persons or obstacles in the surrounding area, then sound the horn and start
the engine.
q
Never sue starting aid fluids as they may cause explosions.
q
Exhaust gas is toxic. When starting the engine in confined spaces, be particularly careful to ensure
good ventilation.
NOTICE
q
Before starting the engine, check that fuel control dial (2)
is at the low idling (MIN) position.
If the fuel control dial is at the FULL position, the engine
will accelerate suddenly and cause damage to the engine
parts, so set it to an intermediate or low speed position.
q
Do not keep the starting motor rotating continuously for
more than 20 seconds.
If the engine fails to start, wait for about 2 minutes and
repeat from Step 2.
When starting in low temperatures, do as follows.
1. Check lock lever (1) is at the LOCK position (L). If the lock
lever is in the FREE position (F), the engine does not start.
2. Set fuel control dial (2) at a low idling (MIN) position.
Do not set fuel control dial (2) at the high idling (MAX) posi-
tion.
Summary of Contents for PC600-7
