OPERATION
MACHINE OPERATIONS AND CONTROLS
3-79
REMARK
The oil level will vary depending upon the oil temperature. Accordingly, use the following as a guide:
Before operation: around L level
(Oil temperature 10 to 30
°
C (50 to 86
°
F))
Normal operation: around H level
(Oil temperature 50 to 80
°
C (122 to 176
°
F))
Check Oil Level In Swing Machinery Case, Add Oil
WARNING
The parts and oil are at high temperature immediately after the engine is stopped, and may cause serious
burns. Wait for the temperature to go down before starting the operation.
1. Remove dipstick (G) and wipe the oil from the dipstick with a
cloth.
2. Insert dipstick (G) fully in the guide.
3. When dipstick (G) is pulled out, if the oil level is between the
H and L marks of the gauge, oil level is proper.
4. If the oil does not reach the L mark on dipstick (G), add
engine oil through dipstick insertion hole (F).
5. If the oil level exceeds the H mark on the dipstick, loosen
drain valve (P) to drain the excess oil.
6. After checking oil level or adding oil, insert dipstick (G) into
the hole.
Summary of Contents for PC600-7
