Fuso Canter 2015 Owner'S Manual Download Page 99

Page: 99 / 520

5-44

Switches and controls

CAUTION

Avoid using the front fog lamps unless visibility

is poor, as they may prove distracting to other

motorists during normal driving conditions.

Use the front fog lamps when visibility is poor due to

fog or snow.

The front fog lamps can be used with the lighting

switch in the

position.

Pressing the front fog lamp switch lights the front

fog lamps. At the same time,

indicator lamp is

illuminated.

The front fog lamps can be turned off by pressing

again the front fog lamp switch or by turning the

lighting switch to the “OFF” position.

This switch operates the lighting inside the van

body. With the starter switch in the “ON” position,

operate the van body dome light switch to turn the

van body interior lighting on or off. An indicator light

comes on in the switch when it is in the “ON” posi-

tion.

CAUTION

Leaving the van body interior lighting on for an

extended period without the engine running can

drain the battery.

The mirror stay can be swung manually in the direc-

tion indicated by the arrow.

Swing the stay to the inward position if the mirror is

obstructing free movement of the vehicle, for exam-

ple, when turning a tight corner, passing an oncom-

ing vehicle or parking in a narrow place.

Front fog lamp switch

Van body dome light switch

Rearview mirrors

Z21351

Z21352

Z21353

FE_FG.book Page 44 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands