Fuso Canter 2015 Owner'S Manual Download

Page: 149 / 520

6-26

Instruments and warning lamps

2.5

Transmission control warning

•

Red warning

The red transmission control warning is displayed

when the DUONIC

system is faulty.

If this indication appears while driving, stop the

vehicle in a safe place and do the following:

1. Firmly apply the parking brake and move the

gearshift lever to “P”.

2. Turn the starter switch to “ACC” or “LOCK”.

3. Turn the starter switch to “ON”.

4. If the indication remains displayed, avoid con-

tinuing to drive and contact your nearest autho-

rized dealer.

•

Amber warning

The amber transmission control warning is dis-

played when the DUONIC

system is faulty (but

automatic or manual gear shifting is possible).

•

If driving in the automatic shift mode is possible,

you may continue to drive but must have the

vehicle inspected by an authorized dealer as

soon as possible.

•

If no automatic gearshift takes place when driv-

ing in the automatic gearshift mode, stop the

vehicle in a safe place and do the following:

1. Firmly apply the parking brake and move the

gearshift lever to “P”.

2. Turn the starter switch to “ACC” or “LOCK”.

3. Turn the starter switch to “ON”.

4. If the warning remains displayed but driving in

the manual gearshift mode is possible, take the

vehicle to an authorized dealer for inspection as

soon as possible.

5. If the warning remains displayed and gear shift-

ing is impossible in the manual gearshift mode,

contact your nearest authorized dealer.

2.6

SAM warning

NOTE:

SAM, which stands for Signal Detection and Actua-

tion Module, is a module that integrates the control

and power distribution functions for the electric

equipment of the cab and truck body.

•

Red warning

The red SAM warning is displayed when a failure

occurs in the electric control system of the SAM.

If this warning appears while driving, stop the vehi-

cle in a safe place and do the following:

1. Firmly apply the parking brake and move the

gearshift lever to “P”.

2. Turn the starter switch to “LOCK”.

Z21713

Z21714

FE_FG.book Page 26 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands