Fuso Canter 2015, Owner'S Manual

Page: 101 / 520

5-46
Switches and controls
Press the horn switch pad at the center of the
steering wheel to sound the horn.
CAUTION
•
Engage the PTO only with the engine run-
ning at idle.
•
Pay careful attention to the indicator
lamp when using the PTO.
The engine output may dangerously change
if the PTO is used for an extended time while
the indicator lamp is flashing, which could
lead to an accident.
If you find the indicator lamp flashing before
using the PTO, first perform parked DPF
regeneration and then engage the PTO. If the
indicator lamp starts flashing during PTO
operation, disengage the PTO and perform
parked DPF regeneration before continuing
the operation. P. 5-56
•
When using the PTO, never fail to engage the
parking brake and place the gearshift lever in
the “P” position. Placing the gearshift lever
in the “P” position is important for safety
although the PTO is operational also in the
“N” position. Placing the gearshift lever in
any position other than “P” or “N” is very
dangerous as this will cause the vehicle to
move and could lead to an accident.
Make sure the parking brake is firmly
engaged and the gearshift lever is in the “P”
position especially when using the PTO
while controlling the engine from outside the
vehicle.
•
Be sure to disengage the PTO before driving.
If you fail to disengage the PTO, the con-
nected equipment/implement may be driven
and could cause an accident. This could also
damage the equipment/implement.
Horn switch
Transmission PTO
Z21355
FE_FG.book Page 46 Wednesday, December 4, 2013 2:10 PM