Fuso Canter 2015 Owner'S Manual Download Page 150

Page: 150 / 520

6-27

3. Turn the starter switch back to “ON”. If the indi-

cation goes out, there are no problems. If the

warning remains displayed, contact your near-

est authorized dealer immediately.

•

Amber warning

The amber SAM warning is displayed when a failure

(of a type that requires inspection of exterior lamps)

occurs in the electric control system of the SAM.

If this warning appears while driving, stop the vehi-

cle in a safe place and do the following:

1. Firmly apply the parking brake and move the

gearshift lever to “P”.

2. Turn the starter switch to “LOCK”.

3. Check the exterior lamps for abnormalities.

Replace a blown lamp if any.

P. 13-18

4. Turn the starter switch back to “ON”.

5. Switch on the replaced lamp. If the warning

goes out, there is no remaining problem with the

SAM.

6. If the warning remains displayed, contact an

authorized dealer as soon as possible.

2.7

Meter cluster warning

This warning is displayed when the electrical sys-

tem of the meter cluster is faulty.

If this warning appears while driving, stop the vehi-

cle in a safe place and do the following:

1. Firmly apply the parking brake and move the

gearshift lever to “P”.

2. Turn the starter switch to “LOCK”.

3. Turn the starter switch back to “ON”. If the warn-

ing goes out, there are no problems.

4. If the warning remains displayed, do not con-

tinue to drive but contact your nearest autho-

rized dealer immediately.

2.8

Engine oil level warning

This warning is displayed when the amount of fuel

mixed with engine oil has exceeded the limit.

•

If this warning is displayed, replace the engine

oil as soon as possible.

•

If even more fuel is mixed with engine oil, this

warning and the

(amber) warning are alter-

nately displayed. If this happens, replace the

engine oil immediately.

Z21715

Z21719

FE_FG.book Page 27 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Brands by name

Popular brands