Fuso Canter 2015, Owner'S Manual

Page: 248 / 520

12-5
4. Attach the retaining hook to the grip beside
the assistant driver’s seat to hold the seat in
place.
•
To cover the opening
1. Remove the retaining hook from the grip while
supporting the seat cushion to prevent it from
dropping.
2. Attach the retaining hook to the spring on the
bottom of the seat cushion to hold the hook in
place.
3. Gently lower the seatback and seat cushion,
then fasten the clamps to retain it.
4. Return the floor mat and seatback to their origi-
nal positions.
CAUTION
•
Be careful not to trap the seat belt or floor
mat when closing the engine access open-
ing.
•
Completely fasten the clamps after closing
the engine access opening.
2 Power steering fluid and engine coolant
level inspection opening
In front of the rear seat, there is an opening for
inspecting and replenishing the power steering fluid
and engine coolant.
Uncover and cover the opening as follows:
1. Remove the cover .
2. Raise the clamp to unhook it and then swing
down the inspection opening cover .
Perform the above procedure in reverse to
cover the opening.
Z20950
FE_FG.book Page 5 Wednesday, December 4, 2013 2:10 PM