Fuso Canter 2015 Owner'S Manual Download Page 90

Page: 90 / 520

5-35

10 If a transmission system warning is

displayed

The multi-information display indicates a warning if

there is a problem with the DUONIC

system. If a

transmission system warning is displayed, take nec-

essary action according to the following instruc-

tions.

10.1

warning (red)

•

If this warning appears while driving:

Immediately slow down by braking and stop the

vehicle in a safe place.

•

Actions to take after stopping the vehicle

1. Place the gearshift lever in the “P” position and

shut off the engine.

2. Restart the engine. If the engine cannot be

started, contact an authorized dealer.

3. If the

warning (red) is not indicated after the

engine is started, you may continue to drive the

vehicle. If the warning is indicated again, do not

continue to drive but contact an authorized

dealer immediately.

10.2

warning (amber)

•

If this warning appears while driving:

•

You may continue to drive if automatic gear

shifting is possible in the automatic shift mode.

However, have the vehicle inspected by an

authorized dealer as soon as possible.

•

If automatic gear shifting does not work in the

automatic shift mode, stop the vehicle in a safe

place.

Z21309

(Red)

Z21544

Z21309

(Amber)

FE_FG.book Page 35 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands