Fuso Canter 2015 Owner'S Manual Download Page 296

Page: 296 / 520

12-53

equivalent could cause corrosion and dam-

age to the radiator.

1 Recommended coolant

Use a coolant containing the FUSO DIESEL

LONGLIFE COOLANT additive and soft water in the

specified proportions.

Having both corrosion preventive and anti-freezing

properties, the additive protects the cooling system

all year around.

Replace and top off the coolant only with water con-

taining FUSO DIESEL LONGLIFE COOLANT or an

equivalent.

2 Water used with coolant

Use soft water with the properties shown in the fol-

lowing table. Do no use hard water from wells and

rivers as it is liable to form scales and cause corro-

sion.

3 Using coolant additive

To prevent the cooling system freezing up and mini-

mize corrosion, use FUSO DIESEL LONGLIFE

COOLANT or an equivalent. FUSO DIESEL

LONGLIFE COOLANT is an ethylene-glycol-based

antifreeze (SAE J814-C) with both anti-freeze and

anti-corrosion properties. Dilute it with soft water to

the specified concentration.

Total hardness

300 ppm or less

Sulfate SO

–

100 ppm or less

Chloride Cl–

100 ppm or less

Total dissolved solids

500 ppm or less

6 to 8

Z09270

FE_FG.book Page 53 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands