Fuso Canter 2015 Owner'S Manual Download Page 344

Page: 344 / 520

13-5

Drive power is insufficient.

Braking is sluggish.

The vehicle pulls to one side during braking.

Possible cause

Remedy

Ref. page

The parking brake is activated.

Release the parking brake com-

pletely.

5-15

The air cleaner is clogged.

Clean or replace the air cleaner ele-

ment.

12-47

The fuel filter is clogged.

Replace the filter element.

12-42

Air is present in the fuel system.

Bleed the fuel system.

13-31

The clutch is slipping.

Have an authorized dealer perform

necessary inspection.

–

The DPF is blocked.

Have an authorized dealer perform

necessary inspection.

–

Crystallized DEF blocks the muffler.

Have an authorized dealer perform

necessary inspections.

–

Possible cause

Remedy

Ref. page

Vacuum is insufficient.

Increase the engine speed to boost

vacuum.

–

Brake fluid is insufficient.

Add brake fluid.

12-35

There is vacuum leak.

Check the vacuum circuit and

retighten connections as necessary.

–

The brake pads are worn.

Have an authorized dealer perform

necessary inspection.

–

There is air in the brake fluid.

Have an authorized dealer perform

necessary inspection.

–

Possible cause

Remedy

Ref. page

Tires are not uniformly inflated.

Inflate tires properly.

12-67

Tires wear unevenly.

Change the tires.

12-70

Cargo is heavier on one side than the

other.

Load cargo evenly.

7-19

FE_FG.book Page 5 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands