Fuso Canter 2015, Owner'S Manual

Page: 355 / 520

13-16
Useful advice for emergencies
2 High-current fuse
The high-current fuses, which protect circuits in the
same way as regular fuses, are fitted in a box next
to the battery. If a high-current fuse is blown, most
of the vehicle’s electrical circuits become inopera-
tive.
2.1 Inspection
1. Place the starter switch in the “LOCK” position
and turn all other switches OFF.
2. Pry and release the two locks of the cover
with your fingers and remove the cover. To
install the cover, push in the cover until the two
locks click.
3. Check for a blown high-current fuse by looking
into the inside through inspection window .
If it is blown, immediately call an authorized
dealer and have them check your vehicle.
NOTE:
The high-current fuses may be hard to check
depending on the position of a box.
If you are difficult to inspect, look into the inside
through inspection window by tilting up the cab or
using an appropriate mirror like a hand mirror.
F41 30A ABS control unit
F42 – –
F43 – –
*
10A
Spare fuse
15A
20A
30A
Fuse
No.
Amperage Protected circuit
Z21129
Z21426
FE_FG.book Page 16 Wednesday, December 4, 2013 2:10 PM