Fuso Canter 2015 Owner'S Manual Download

Page: 95 / 520

5-40

Switches and controls

3. When the desired speed is reached, turn the

RESUME/SET switch toward the “SET” side.

The

indicator lamp will illuminate indicating

that the cruise control is activated. Now the

desired speed is memorized, so release the

accelerator pedal. The vehicle will run maintain-

ing that speed automatically.

NOTE:

•

If you activate the cruise control while driving

with the DUONIC

system in the manual shift

mode, the DUONIC

system will switch to the

automatic shift mode. When the DUONIC

sys-

tem switches to the automatic shift mode, the

multi-information display will show “

”.

•

Before pressing the ON side of the main switch

to set a desired speed, make sure the exhaust

brake switch is in the OFF position. You will not

be able to set the speed if the exhaust brake

switch is in the ON position. When driving with

the cruise control active, exhaust braking can be

used as usual, but the cruise control function will

be deactivated while exhaust braking is being

used.

3 To increase the set speed in cruise con-

trol mode

•

By using the SET/RESUME switch

Turn the SET/RESUME switch toward the

“RESUME” side. The vehicle will accelerate.

Release the switch when the desired speed is

reached. The vehicle will cruise at the new, higher

speed.

•

By using both accelerator pedal and SET/

RESUME switch

1. Use the accelerator pedal to reach the desired

speed.

Z21525

Z21527

Z21524

FE_FG.book Page 40 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands