manualshive.com logo in svg

Fuso Canter 2015, Owner'S Manual

Share
Download
Fuso Canter 2015 Owner'S Manual Download Page 270

12-27

1.4

Resetting the engine control unit

1. Turn the starter switch to “ON”. Do not start the

engine.

2. Depress the accelerator pedal to the floor and

keep it there for at least 20 seconds.

3. While still keeping the accelerator pedal

depressed to the floor, pump the brake pedal at

least 6 times.

When the engine control unit is reset, the 

indicator (amber) appears on the display for

about 10 seconds.

NOTE:

The engine control unit calculates the engine oil

replacement time. The steps above are necessary

in order to reset the data used for determining the

engine oil replacement time. 

2 Clutch control fluid

Recommended oil: FUSO ATF SP III

Clutch control fluid quantity

2.1

Check, addition, and replacement

Have the clutch control fluid checked, added, or

replaced by an authorized dealer.

      WARNING

Take care not to spill engine oil as engine oil

on the exhaust manifold or other hot sec-

tions of engine could catch fire. Wipe clean

the oil if spilt.

Replacement intervals

Every 60,000 km 

(36,000 miles)

Quantity required

2.0 liters (2.1 qts)

FE_FG.book  Page 27  Wednesday, December 4, 2013  2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands