Fuso Canter 2015 Owner'S Manual Download Page 130

Page: 130 / 520

6-7

The driving restriction is cancelled as soon as the

DEF tank is replenished.

1 Outline of multi-information system

MODE switch

SELECT switch

SET/RES switch

Multi-information display

Information area

Warning/indicator area

Transmission information area

Odometer/trip meter area

Time/outside temperature area (outside temper-

ature indication is available for vehicles with a

fully automatic air conditioner)

The multi-information system indicates the following

types of information on the multi-information display

located on the meter cluster.

•

Information area: coolant temperature, amount

of PM in the DPF, and vehicle-related informa-

tion including the maintenance schedule.

•

Warning/indicator area: various warnings and

indicators.

P. 6-22

•

Transmission information area: gear positions

selected by the DUONIC

system and other

transmission-related information.

P. 5-23

•

Odometer/trip meter: total running distance and

individual trip distance.

•

The MODE, SELECT, and SET/RES switches

are used for selection, setting, and confirmation

on each screen.

Multi-information system

Z21550

FE_FG.book Page 7 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands