manualshive.com logo in svg

Fuso Canter 2015, Owner'S Manual

Share
Download
Fuso Canter 2015 Owner'S Manual Download Page 73

5-18

Switches and controls

NOTE:

•

Do not keep the exhaust brake switch in the

activation position at all times. Keeping the

switch in the activation position worsens fuel

consumption, as doing so causes the exhaust

brake to work frequently and thus the vehicle to

decelerate and accelerate frequently.

Save fuel by using the exhaust brake switch

appropriately according to road and traffic condi-

tions.

•

The exhaust brake is activated when the auto-

matic DPF regeneration takes place during

parking. The 

 indicator, however, is not illu-

minated.

•

Activation and deactivation of exhaust

brake

Pushing the lever forward activates the exhaust

brake. While the exhaust brake is activated, the 

indicator lamp stays illuminated.

Deactivated
Activated

The exhaust brake will be temporarily disabled in

the following conditions. Full functionality will be

returned when the original conditions have been

restored.

•

The accelerator pedal is depressed.

•

The gearshift lever is moved to “N”.

•

The ABS is operating.

6  Wiper and washer switch

      CAUTION

•

Operating the wipers when the windshield is

dry damages the windshield glass. If the

glass is dry, be sure to squirt it with washer

fluid before operating the wipers.

•

Check nearby conditions before operating

the washer switch. Washer fluid may splash

around in some circumstances.

      WARNING

In cold weather, warm the windshield with the

heater before operating the washer since

washer fluid could otherwise freeze onto the

windshield and obstruct your vision.

Z23261

FE_FG.book  Page 18  Wednesday, December 4, 2013  2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands