Fuso Canter 2015, Owner'S Manual

Page: 381 / 520

15-2
Maintenance schedule
Regular maintenance is vital to maximizing your vehicle’s performance, service life, and
safety.
Following the maintenance schedule will give optimum results.
The preceding sections describe simple maintenance checks and procedures that can be
carried out by the owner. If you have difficulty or your vehicle needs maintenance work that is
not shown in this manual, please take the vehicle to an authorized dealer.
1 For maintenance schedule in severe use
In some maintenance items, maintenance schedule in severe use is set.
Perform each item of inspection or replacement according the “Severe use” interval if the
type of severe use in Item column of the periodic inspection schedule table corresponds to
one of the conditions in the following table (A) ~ (J).
2 Maintenance schedule
For the replacement intervals of lubricants and fluids, see the section entitled “Lubrication
schedule”.
Symbols used
I : Inspect, and correct or replace as necessary.
A : Adjust.
C : Clean.
R : Replace or change.
T : Tighten.
L : Lubricate.
•: No inspection is necessary.
Severe
condition
types
Conditions of severe use
A
Operating in slow vehicle speed (lower than 20 km/h (12 mph) in average and
more than 30% of total operation) or operations involving frequent starts and
stops.
B
Operations involving frequent engine starts and stops condition in 10 minutes
and in 10 km (6 miles) distance.
C Operating on over loading condition (more than 30% in total operation)
D Operating on rough roads (more than 30% in total operation)
E Operating in tropical region (above 46°C (114°F))
F Operating in cold region (lower than -25°C (-13°F))
G Operating in dusty areas
H Operating on long distance (10,000 km/month (6,000 miles/month) or more)
I Operating on frequent mountainous roads (more than 30% in total operation)
J Operating on frequent uphill roads trip (more than 30% in total operation)
FE_FG.book Page 2 Wednesday, December 4, 2013 2:10 PM