Fuso Canter 2015 Owner'S Manual Download

Page: 96 / 520

5-41

2. When the desired speed is reached, turn the

SET/RESUME switch to the “SET” side for 1

second or longer. The vehicle will then cruise at

the new, higher speed.

4 To decrease the set speed in cruise con-

trol mode

Turn the SET/RESUME switch toward the “SET”

side. The vehicle will decelerate. Release the

switch when the desired speed is reached. The

vehicle will cruise at the new, lower speed.

5 To accelerate temporarily in cruise con-

trol mode

Depress the accelerator pedal as you do in normal

accelerating. When the pedal is released, the vehi-

cle will cruise at the set speed again.

6 Automatic deactivation of the cruise

control

The cruise control is deactivated automatically and

the

indicator lamp also goes out in the following

conditions:

•

When the brake pedal is depressed

•

When the exhaust brake <option> is activated

•

When the gearshift lever is moved to any posi-

tion other than “D”.

Z21526

Z21524

FE_FG.book Page 41 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands