Fuso Canter 2015 Owner'S Manual Download Page 285

Page: 285 / 520

12-42

Simple inspection and service

If the engine oil is replaced, add the necessary

quantity of engine oil.

P. 12-25

13. Tighten the oil filter case.

14. After cranking the engine according to the

instructions on page 5-8, start the engine.

15. Start the engine and check for oil leakage.

16. Stop the engine and, after letting it stand for

more than 10 minutes, check the oil level.

2 Fuel filter replacement

Tightening

torque

25 to 30 N·m

(18.4 to 22.1 ft.lbs.,

2.5 to 3.0 kgf·m)

Replacement

intervals

Every 40,000 km (24,000 miles)

or every 12 months

WARNING

•

Fuel is highly flammable and should be

kept away from hot objects and open

flames owing to the risk of fire or explo-

sion. Wipe up any spilt fuel.

•

After installing the fuel filter, confirm that

no fuel is leaking out. Leaking fuel could

cause a fire or explosion.

•

Use only the fuel filter specified for your

vehicle. Use of other filters could cause

fuel to leak and cause a fire or explosion.

•

When replacing the fuel filter element, be

sure to use the special tool to remove and

reinstall the fuel filter. If the fuel filter is

reinstalled inappropriately, fuel could leak

and the filter itself could become dam-

aged, possibly resulting in a fire and/or

explosion. If you do not have the special

tool, please contact an authorized dealer.

•

Be careful not to damage the filter case, as

this could cause fuel leakage.

•

Keep cigarettes and other sources of heat

away from the vehicle while replacing the

fuel filter. They are dangerous because

they could set fire to the fuel.

•

When replacing the fuel filter, you will be

working in a tight space. Be careful not to

injure yourself on the edges of nearby

components.

FE_FG.book Page 42 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands