Fuso Canter 2015 Owner'S Manual Download

Page: 372 / 520

13-33

•

Never use the tie-down hook(s) under the

frame for towing purpose. The tie-down hook

is to secure the vehicle when transporting it.

If the hook is used for towing, damage to the

front bumper or frame may result.

<FG>

If the vehicle becomes stuck in sand, mud, or snow,

free it by driving forward and backward.

P. 7-13

If this method is not successful, free the vehicle by

towing it as described below.

CAUTION

•

Use the towing method described in this

section only to free the vehicle from soft

ground. To tow the vehicle in the event of a

breakdown, use the method described in the

previous section.

•

The stranded vehicle must be unloaded com-

pletely.

When the vehicle becomes stuck in

soft ground

Z21440

FE_FG.book Page 33 Wednesday, December 4, 2013 2:10 PM

Summary of Contents for Canter 2015









































































































































































































































































































































































































































































































































Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands

Fuso Canter 2015, Owner'S Manual

Search results

Summary of Contents for Canter 2015

Reviews:

Related manuals for Canter 2015

Brands by name

Popular brands