Fukuda Denshi Dynascope 8000 Series, Maintenance Manual

Page: 133 / 154

8-1
Chapter 8 Cleaning/Disinfecting/Storing After Usage/Handling the Equipment
Chapter 8 Cleaning/Disinfecting/Storing
After Usage/Handling the Equipment
This section explains about how to handle the equipment.
After Using the Equipment

When unplugging the cables, make sure to pull from the connector part of the cable and avoid applying
excessive force.

Clean the equipment, accessories, and cables, and keep them together in one place for next use.

Always check for adequate supply of ECG electrodes, and other disposable accessories. If any shortage is
found, contact your nearest service representative.
Display

As the touch panel is made of glass, a strong impact may cause damage. Pay attention not to hit or drop the
touch panel.

As the display panel is vulnerable, do not scratch or rub it with a hard item.

If the display panel cracks, or the internal part of the equipment gets exposed due to any accident, do not touch
the display panel or the exposed part. It may cause electric shock or injury to the operator. Contact your nearest
service representative.
Storing the Equipment and Recording Paper
This section explains how to store the equipment and recording paper.
Equipment

Store in a place where the equipment will not be exposed to splashing water.

Store in an area where the environmental conditions, such as atmospheric pressure, temperature, sunlight, dust,
sodium, sulfur, will not adversely affect the system.

Store in a level area where the equipment is not exposed to vibration and shock (including during
transportation).

Store in an area which meets the following environmental conditions.

Storage Temperature: -10 ° C to 60 ° C

Storage Humidity: 10% to 95% (at 40 ° C, non-condensing)

Atmospheric Pressure: 70 kPa to 106 kPa