Fukuda Denshi Dynascope 8000 Series, Maintenance Manual

Page: 110 / 154

5-24
Chapter 5 Initial Settings User Mode Registration
3
Press [OK] to apply the current setting to all modes.
5
Press the [Initialize All Modes] key for 2 seconds to initialize all user modes.
6
By pressing the [Link with Patient Class.], the monitor mode to link with the patient classification can be set.

The patient icon indicates the patient classification registered for each monitor
mode.
When the monitor mode is linked with the patient classification, the patient icon
will change to blue.
1
Link Settings

Select the monitor mode to link with each patient classification. One monitor mode per each patient
classification can be set.
NOTE

When [Regist] or [Initialize] key is pressed on the monitor mode setup window, the link
setting for that monitor mode will be canceled.

When patient classification is changed by pressing the [Set All Modes] key, link
settings for all monitor modes will be canceled.

When [Initialize All Modes] key is pressed, link settings for all monitor modes will be
canceled, and "Link with Patient Class." will be set to OFF.
2
ON/OFF of "Link with Patient Class."

[ON]: The monitor mode will change when the patient classification is changed.

[OFF]: The monitor mode will not change when the patient classification is changed.
NOTE

When selecting [ON] for "Link with Patient Class.", set the following in advance.
*On the "Link Settings", select the monitor mode to link with each patient classification.
*Set the appropriate alarm limits for the linked monitor mode.
*Check the settings for "Power ON/Discharge". (

"Power ON/Discharge" P5-15)
1
2