Fukuda Denshi Dynascope 8000 Series, Maintenance Manual

Page: 88 / 154

5-2
Chapter 5 Initial Settings Administrator Setup
Administrator Setup
This section explains about the "Administrator Setup" menu.
The "Administrator Setup" is composed of [Key Lock] and [Password Setup].
NOTE

To display the administrator setup menu, a password is required. There are 3 levels of
password with different operation authorization. With higher level password, the lower level
settings can be changed.

For details of the password, refer to your nearest service representative.
Key Lock
On the "Key Lock" menu, setup items can be locked so that settings cannot be changed unless a password is entered.
The setup items are in tree structure.
If the upper level item is locked, the lower level item will be also locked.
For the following tree structure, if "Level 3A-2" is locked, only this item will be masked.
If "Level 2A" is locked, the locked items will be as follows.
If "Level 1" is locked, the locked items will be as follows.
1
Press the [Menu], [Setup], [Initial Settings], [Admin. Setup] keys.
2
Enter the password.