U41290-J-Z816-3-76
53
5.2 Display Format of Operator Panel
5.2
Display Format of Operator Panel
This section describes the display format on the operator panel.
The operator panel has a two-line state indication LCD.
shows the format of the state indication LCD.
Note1: The selected menu symbol is indicated with an underline cursor. Initially,
the selected symbol is “T”.
Note2: The state indication LCD displays the following information:
l
First line
Message display area, showing the operating status of the main unit, or a
menu of operations.
l
Second line
Symbols for operations that you specify using the cursor switch and
decision switch, as described below:
- RR: RCI segment ID (decimal notation)
This ID is not used for this main unit.
- NN: Node ID (hexadecimal notation)
If more than one main unit is connected to the RCI network, this
ID is assigned to identify each main unit. The assignment of the
node ID is performed by a Fujitsu engineer.
- T:
Intake-air temperature
- Z:
AC input status
-
∗
:
Abnormal status (displayed only if an error occurs)
-
6
:
Partition number selection
- 0:
Partition selection
Figure 5.2 Display format of operator panel
