U41290-J-Z816-3-76
23
3.1 Connecting the Power Cables
4
For a unit using software-based automatic power control, do not set the MODE
switch on the operator panel to UNLOCK or LOCK. If a main line switch in the
power distribution box is switched off and on while the MODE switch is set to
UNLOCK or LOCK, the unit may be powered on automatically as soon as the
main line switch is switched on. To avoid this, set the MODE switch to
MAINTENANCE.
Note:
One power distribution box is included as standard equipment with the main
unit (primary power feed, in the figure above). An additional power
distribution box must be purchased separately for secondary power feed.
Figure 3.7 Power cable connection for the PRIMEPOWER900 main unit
(model name: PW0X0CR1x, PW0X0CR6x)
(dual power feed configuration)
CB
(Rear of the main unit)
CB
