78
U41290-J-Z816-3-76
CHAPTER 7 Approaches to Troubleshooting
18 P-BOX#L TH W
Indicates a PCI/disk box exhaust
temperature warning.
–
19 I-BOX#L TH A
Indicates a PCI/disk box exhaust
temperature error.
–
20 I-BOX#L UNIT TH
Indicates that the PCI/disk box
temperature exceeded the upper
limit.
–
21 IN-TH HIGH W
Indicates an intake air
temperature warning.
–
22 IN-TH HIGH A
Indicates that the intake air
temperature exceeded the upper
limit.
–
23 IN-TH LOW
Indicates that the intake air
temperature exceeded the lower
limit.
–
24
IN-TH ERR
Indicates that an error occurred in
the intake air temperature sensor.
–
25
P#N Hangup XXXX A timeout or alive check error
occurred during POST monitoring.
This message is displayed during
system control.
26
CONFIG:FAN
A fan configuration error occurred.
-
27
CONFIG:FE
An FE configuration error occurred.
-
28
CONFIG:I-BOX
A PCI/disk box is incorrectly
connected.
-
29
I-BOX#L PN FAIL
A power failure occurred at the PSU
of a PCI/disk box.
N: PSU number
30
SB#L INIT ERROR
An initialization error occurred at
SB#L.
An error occurred when SB#L
was being initialized.
31
SB INIT ERROR
An initialization error occurred at an
SB.
This message is displayed when
a faulty SB cannot be identified.
32
INIT ERROR
An initialization error occurred.
This message is displayed for an
error that occurred after SB
initialization.
#L:
Location number of the unit where an error occurred
SCF: System Control Facility
Table 7.1 Error messages displayed on the operator panel (2/2)
No.
Message
Description
Remarks
