Fujitsu Primepower200, User Manual

Page: 217 / 272

11.2 CD-ROM Drive
11.2.2 CD-ROM discs
Only CD-ROM discs with the mark shown in Figure 11.2 can be used in this CD-ROM drive.
Figure 11.2 CD-ROM Disc Mark
11.2.3 CD-ROM disc handling precautions
CAUTION
Do not scratch the surface of a CD-ROM disc. Pay special attention when
removing a CD-ROM disc from its case.
Do not widen the center hole of a CD-ROM disc.
Do not write on a CD-ROM disc with a ball-point pen or pencil.
Do not clean a CD-ROM disc with benzene, paint thinner, water, record
spray, or an antistatic agent.
Do not expose a CD-ROM disc to heat or sunlight.
Do not store a CD-ROM disc in a place that undergoes rapid changes in
temperature or humidity.
If a CD-ROM disc is not being used, remove it from the CD-ROM drive, and
store it in its case to protect it from dust, scratching and breakage.
189