Fujitsu Primepower200, User Manual

Page: 240 / 272

CHAPTER 11 Internal I/O Units
11.5.8 Ejecting a data cartridge
1
Check that the Access LED is not blinking (the 8mm tape drive is not operating).
2
Press the Eject button.
The tape is rewound and unloaded. The Ready LED will blink during this operation.
When the tape has finished being rewound, the data cartridge is automatically ejected.
After the tape is ejected, the Ready LED goes out.
11.5.9 Cleaning the tape heads
The following describes daily care, the cleaning cartridge, how to clean the tape heads, and when to replace the
cleaning cartridge.
Daily care
CAUTION
Unit Damage/Data Destruction
The 8mm tape unit reads and writes data using a magnetic head.
This head becomes dirty due to dust, dirt and magnetic dust
particles off the tape inside data cartridges. If you do not
periodically clean the magnetic head using a cleaning cartridge, the
unit may become damaged or data may be lost.
The tape heads must be cleaned:
After the 8mm tape drive has been used for more than 30 hours.
(Generally, we recommend periodic cleaning, e.g. "Monday morning every week.")
If one month has passed since the last head cleaning, even if the 8mm tape drive has not been
used.
Before you insert a brand new data cartridge.
When the Warning LED and Ready LED blink simultaneously.
If a cleaning instruction message is output on the console.
212