Fujitsu Primepower200, User Manual

Page: 81 / 272

4.3 Preparations for Use
To prevent condensation in the PRIMEPOWER400 Pedestal Server, do not raise the ambient room
temperature rapidly in winter.
Use the PRIMEPOWER400 Pedestal Server only after it has warmed up sufficiently.
Do not install the PRIMEPOWER400 Pedestal Server near EM noise generating devices such as
photocopiers, air conditioners, or welders.
Take electrostatic prevention measures. Note that some carpets generate static electricity easily and can cause
the PRIMEPOWER400 Pedestal Server to malfunction.
When moving the PRIMEPOWER400 Pedestal Server, do not pull on the front cover. Otherwise, the Server
may be damaged.
4.3.2 Installation specifications
Table 4.2 and Table 4.3 show the installation specifications for the PRIMEPOWER400 Pedestal Server.
Table 4.2 Installation Specifications of the PRIMEPOWER400 Pedestal Server (1/2)
Item Specification
Weight 125 kg (275.94 lb.) (max.)
Power Supply
Voltage
Frequency 50/60 Hz (+2 ~ -4%)
Max. Current 12.0 A
Leak Current
Frame Resistance
Temperature Operating
Non-operating
Humidity Operating 20 ~ 80% RH (non-condensing)
Non-operating 8 ~ 80% RH (non-condensing)
Vibration Operating 0.2 G
Non-operating 0.4 G
Noise 47 db(A) (*2)
Form Factor Pedestal
6.0 A
Single phase
AC100V (
±
10%)
Single phase
AC200V (
±
10%)
²
3.5 mA
²
100
Ω
5 ~ 35
û
C (+41 ~ +95 F) (*1)
0 ~ 50
û
C (+32 ~ +122 F)
*1: If the ambient temperature exceeds 35 deg. C (95 deg. F) during operation, a warning message is
displayed. Take steps to rectify the problem immediately.
*2:
The indicated noise is the mean value of measurements obtained in a low-noise anechoic chamber.
The actual noise measured at the installation site may be greater than the indicated value due to
background noise and echoes.
53