manualshive.com logo in svg

Fujitsu ETERNUS LT160, User Manual

Share
Download
Fujitsu ETERNUS LT160 User Manual Download Page 93

4.1  Overview of the Operator Panel

C144-E072-01EN

4-7

When used as the home window, the status of the library and drive is displayed.
When used as the menu window, buttons for performing operations are displayed.

(4) Icon area

The library status is displayed using characters in real time.

*

When an icon displayed in the home window status is selected, the contents of
the icon are displayed.

The following table lists the icons that indicate the library status.

Library Error

A hardware error occurred in the library.

Library Alarm

The alarm information for the library is retained.
This icon goes off if the alarm status is released.

CAS Opened

The CAS door is open.

Exchange Clean Tape

Insert from the CAS a new cleaning cartridge that is usable.

No Clean Tape Exist

Insert a cleaning cartridge from the CAS.

Exist In Reserve Cell

Open the front door and remove the cartridge.

Front Door Opened

The front door is open.

Library Offline

The library is offline.

Summary of Contents for ETERNUS LT160















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands