Fujitsu ETERNUS LT160, User Manual

Page: 179 / 238

5.5 Setting Library Information
C144-E072-01EN 5-41
Display item Explanation
in the Trap Destination IP Address.
Device Administrator Enter the administrator name of this library. Up to 20
characters can be entered in the text area. Characters that
can be entered are en-size alphanumeric characters and en-
size symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Information entered here is reported in SysContact of the
MIB information.
Device Name Enter a unique library device name. Up to 20 characters
can be entered in the text area. Characters that can be
entered are en-size alphanumeric characters and en-size
symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}). Information
entered here is reported in SysContact of the MIB
information.
Device Location Enter the installation location of the library device. Up to
20 characters can be entered in the text area. Characters
that can be entered are en-size alphanumeric characters
and en-size symbols (!"#$%&'()*+'-./:;<=>?@[\]^_`{|}).
Information entered here is reported in SysLocation of the
MIB information.
Remarks:
If any character that is not allowed is entered, an input error message
is displayed.
3) Click the [OK] button after all settings are completed.
4) The system displays a confirmation window showing the input contents. Click the
[OK] button if it is OK to proceed. To make entries again, click the [Back] button.
5) If settings are finished, the system displays a window showing the processing results.
6) If settings are finished successfully, a window to ask whether to restart the SNMP
agent is displayed (Values that have been set are enabled only after restarting the
SNMP agent.).