manualshive.com logo in svg

Fujitsu ETERNUS LT160, User Manual

The Fujitsu ETERNUS LT160 User Manual is available for free download on our website. This comprehensive manual provides detailed instructions and essential information to maximize your experience with the product. Access the manual at manualshive.com and enhance your understanding of the Fujitsu ETERNUS LT160 for optimal utilization.

Share
Download
background image

5.3  Referencing Library Information

C144-E072-01EN

5-29

The following shows an example of mail contents to be sent when a library error occurs.

*** The Library error occurred. ***

Timestamp : 2002/1/1 12:00:00

Indicates the time at which an error occurred.

IP Address : 121.25.23.117

Indicates the IP address (The device name is displayed if it is
set.).

FSC : 20001001

Indicates the Fault Symptom Code.

FRU : PCA LCNT UNIT

Indicates the replacement parts.

Sense Key : 04

Indicates the Sense key.

ASC/ASCQ : 4400

Indicates ASC/ASCQ.

Barcode Label : LTO281L1

Indicates the bar code label used when an error occurred.

Host ID : 01

Indicates LOOP ID of the host or switch.

Target ID : 125

Indicates LOOP ID of the library.

Logical Unit Number : 00

Indicates the Logical Unit number of the library.

Command code : 01

Indicates the SCSI command when an error occurred.

Source Address : 1000

Indicates the source cell address.

Destination Address : 500

Indicates the destination cell address.

Library Serial Number : XZ000001

Indicates the serial number of the library.

Version of Overall Library : 00-01

Indicates the total version number of the controller.

Version of Library Control Firmware : R0_1_0-020426

Indicates the firmware version number of the controller.

Version of Library Control Hardware : Board:2/FPGA:3

Indicates the hardware version number of the controller.

Version of Library Servo Firmware : V01L05

Indicates the firmware version number of the servo unit.

Version of Library Servo Hardware : Board:0/FPGA:2

Indicates the hardware version number of the servo unit.

Version of Overall Drive Module : 000000000260

Indicates the total version number of the drive module.

Version of Drive Unit00 Firmware : 18N2

Indicates the firmware version number of the drive unit 0.

Version of Drive Control Unit00 Firmware : 0056

Indicates the firmware version number of the drive controller 0.

Version of Drive Unit01 Firmware : 18N2

Indicates the firmware version number of the drive unit 1.

Version of Drive Control Unit01 Firmware : 0056

Indicates the firmware version number of the drive controller 1.

The following shows an example of mail contents to be sent when a drive error occurs.

*** The drive error occurred. ***

Timestamp : 2002/1/1 12:00:00

Indicates the time at which an error occurred.

IP Address : 121.25.23.117

Indicates the IP address (The device name is displayed if it is
set.).

FSC : 48001001

Indicates the Fault Symptom Code.

FRU : DRV UNIT0

Indicates the replacement parts.

Sense Key : 04

Indicates the Sense key.

ASC/ASCQ : 4400

Indicates ASC/ASCQ.

Barcode Label : LTO281L1

Indicates the bar code label used when an error occurred.

Library Serial Number : XZ000001

Indicates the serial number of the library.

Version of Overall Library : 00-01

Indicates the total version number of the controller.

Version of Library Control Firmware : R0_1_0-020426

Indicates the firmware version number of the controller.

Version of Library Control Hardware : Board:2/FPGA:3

Indicates the hardware version number of the controller.

Version of Library Servo Firmware : V01L05

Indicates the firmware version number of the servo unit.

Version of Library Servo Hardware : Board:0/FPGA:2

Indicates the hardware version number of the servo unit.

Version of Overall Drive Module : 000000000260

Indicates the total version number of the drive module.

Version of Drive Unit00 Firmware : 18N2

Indicates the firmware version number of the drive unit 0.

Version of Drive Control Unit00 Firmware : 0056

Indicates the firmware version number of the drive controller 0.

Version of Drive Unit01 Firmware : 18N2

Indicates the firmware version number of the drive unit 1.

Version of Drive Control Unit01 Firmware : 0056

Indicates the firmware version number of the drive controller 1.

Summary of Contents for ETERNUS LT160















































































































































































































































Reviews:

No comments

Related manuals for ETERNUS LT160

D-Link DP-300+ User Manual preview
DP-300+
Brand: D-Link Pages: 38
D-Link Epress EtherNetwork DP-301P+ Datasheet preview
Epress EtherNetwork DP-301P+
Brand: D-Link Pages: 2
Z Microsystems ZX1 User Manual preview
ZX1
Brand: Z Microsystems Pages: 17
IBM QS21 - BladeCenter - 0792 Installation And User Manual preview
QS21 - BladeCenter - 0792
Brand: IBM Pages: 110
HYVE AQUILADSF Manual preview
AQUILADSF
Brand: HYVE Pages: 22
IBM eServer BladeCenter HS40 Type 8839 Installation And User Manual preview
eServer BladeCenter HS40 Type 8839
Brand: IBM Pages: 120
H3C UniServer R4900 G3 Quick Start Manual preview
UniServer R4900 G3
Brand: H3C Pages: 24
Omneon MediaGrid ContentServer 3000 Quick Reference Manual preview
MediaGrid ContentServer 3000
Brand: Omneon Pages: 2
Advantech DVG-1100 Manual preview
DVG-1100
Brand: Advantech Pages: 43
Supero SUPERSERVER 5015M-NT User Manual preview
SUPERSERVER 5015M-NT
Brand: Supero Pages: 134
DNP WPS PRO User Manual preview
WPS PRO
Brand: DNP Pages: 136
Kystar Kommander-Z4 User Manual preview
Kommander-Z4
Brand: Kystar Pages: 46
Compatible Systems INTRAPORT 2 Administrator'S Manual preview
INTRAPORT 2
Brand: Compatible Systems Pages: 75
EVGA PD02 PCoIP Zero Client Specifications preview
PD02 PCoIP Zero Client
Brand: EVGA Pages: 2
EVGA PD02 PCoIP Zero Client TAA Compliant Specification preview
PD02 PCoIP Zero Client TAA Compliant
Brand: EVGA Pages: 2
Inspur i24 Server Acceptance Manual preview
i24
Brand: Inspur Pages: 37
VBrick Systems ETHERNETV 4410-0118-0009 Admin Manual preview
ETHERNETV 4410-0118-0009
Brand: VBrick Systems Pages: 202
Oracle Exalogic Elastic Cloud Owner'S Manual preview
Exalogic Elastic Cloud
Brand: Oracle Pages: 342

Brands by name

Popular brands

Load more brands