Fujitsu ETERNUS LT160, User Manual

Page: 44 / 238

Overview
1-18 C144-E072-01EN
Figure 1.15 Figure for explaining cartridge insertion method b
* Orientation of cartridges during insertion
Set the orientation of the magazine so that the bar code label affixed to the cartridge rear
side faces the front of the magazine and the bottom (surface with the hub) of the cartridge
is pointing downward. Do this when the cartridge storage shelf unit is facing the front of
the cartridge and the handle for transportation is pointing upward (
Figure 1.15 ). If not set
in the correct orientation, the lever for keeping the cartridge from being inserted
backwards is extended, preventing insertion of the magazine into CAS. In this case, set
the cartridge so that its orientation is correct.
1.1.5.2 Ejecting cartridges from the magazine
1) Hold the magazine by one hand and then rotate the cartridge drop prevention lever
using the same hand.
Remarks:
Keep in mind the orientation of the magazine because cartridges will
drop if the cartridge storage shelf unit is oriented downward.
2) Remove the cartridge using the other hand while maintaining the above state.