Fujitsu ETERNUS LT160 User Manual Download Page 105

Page: 105 / 238

4.3 Referencing Library Information

C144-E072-01EN

4-19

Figure 4.14 Host interface information reference window

(When the AL connection/Soft address are set)

4.3.2.2 Referencing the host WWPN permitted for each adapter

It is possible to reference the host WWPN to which access is permitted set for each
adapter (*1).

*1 It is possible to reference the host WWPNs for adapters whose adapter port is

connected to a Fiber Channel.

Select the [Host WWPN] button.

INFORMATION menu
-Host I/F
-Adapt#0
+Host WWPN

WWPNs of the hosts to which access is permitted for the specified adapter are
displayed.

The maximum number of permitted hosts is 8 for each adapter.

Remarks:

If no host WWPN is set, all hosts can be accessed.
If a host WWPN is set, access is permitted to the setup host only.

Summary of Contents for ETERNUS LT160















































































































































































































































Search results

Summary of Contents for ETERNUS LT160

Reviews:

Brands by name

Popular brands

Fujitsu ETERNUS LT160, User Manual

Search results

Summary of Contents for ETERNUS LT160

Reviews:

Brands by name

Popular brands