Fujitsu ETERNUS LT160 User Manual Download

Page: 120 / 238

Operator Panel Operation

4-34

C144-E072-01EN

4.5.2

Setting library information

First, select the [Library] button from the SETUP menu.

SETUP menu
+Library

Set the library functions by using the Enable/Disable from the List buttons.

Auto Clean

Set whether to perform the auto cleaning for the drive.

Enable: Perform the auto cleaning.

Disable: Do not perform the auto cleaning.

Auto Inventory

Set whether to perform the auto inventory operation after power-
on.

Enable: Perform the inventory operation.

Disable: Do not perform the inventory operation.

Auto Eject

Set whether to return any cartridge remaining in the drive during
power-on automatically to its original cell by using the library.

Enable: Return to the original cell.

Disable: Do not return to the original cell.

Fast Load

Set whether to enable fast loading, which speeds up mounting for
a drive.

Enable: Enable the fast load function.

Disable: Disable the fast load function.

Remarks:

These functions may not be usable depending on the backup software.
For more information, see the "Setup Guide" provided with the
library or the manual of the applicable backup software.

Summary of Contents for ETERNUS LT160















































































































































































































































Search results

Summary of Contents for ETERNUS LT160

Reviews:

Related manuals for ETERNUS LT160

Brands by name

Popular brands

Fujitsu ETERNUS LT160, User Manual

Search results

Summary of Contents for ETERNUS LT160

Reviews:

Related manuals for ETERNUS LT160

Brands by name

Popular brands