manualshive.com logo in svg

Fujitsu ETERNUS LT160, User Manual

Share
Download
Fujitsu ETERNUS LT160 User Manual Download Page 122

Operator Panel Operation

4-36

C144-E072-01EN

Remarks:

To enable setup values, the library needs to be restarted.

4.5.4 

Setting the clock

If the library is set up for the first time the library clock needs to be set from the operator
panel or remote panel.

The clock is required so that the time can be recorded in the error information.

1)

Select the [Time] button from the SETUP menu.

SETUP menu
  +Time

2)

For Year, Month, Day, Hour, and Minute, select the [Ten Key] icon and then make
entries using the ten-key pad.

If the entries are completed, select the [OK] button.

Remarks:

Years that can be entered are 2002 to 2037.

3)

Select the [DOWN] button to go to the next window.  Set the Time Zone using the
arrow buttons.

Table 4.5

 lists the values that can be specified.

Summary of Contents for ETERNUS LT160















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands