manualshive.com logo in svg

Fujitsu ETERNUS LT160, User Manual

Share
Download
Fujitsu ETERNUS LT160 User Manual Download Page 121

4.5  Setting Library Information

C144-E072-01EN

4-35

4.5.3 

Setting information about the network

This device has a LAN (TCP/IP protocol) communication function.

-

Remote panel function

You can reference or set up the library or drive in the Web browser.

Remarks:

1. The recommended browser is Microsoft Internet Explorer 5.0 to

6.0 and Netscape Navigator 4.7 to 4.78.

2. The remote panel uses Cookies and Java Script.  These functions

must be enabled in the browser that will be used.

-

E-mailing function

If the library or drive detects a hardware error, fault information is reported by e-
mail.

Remarks:

For the settings of the e-mailing function, see Section 

5.5.5, "Setting

the e-mail function."

-

REMCS function (REMote Customer Support system)

This function links the customer and the maintenance management system of Fujitsu
to provide support such items as recognizing error occurrences, reducing recovery
time, and firmware delivery.

Remarks:

For information about the method of applying the REMCS function,
contact the maintenance person.

1)

Select the [Network] button from the SETUP menu.

SETUP menu
  +Network

2)

For the IP address, subnet mask, and gateway IP address, select the [Ten Key] icon
and then make entries using the ten-key pad.

If the entries are completed, select the [OK] button.

3)

A confirmation message window is displayed.

Select the [OK] button if it is OK to proceed.

Selecting the [CANCEL] button displays the input window.

4)

A window indicating that processing is under way is displayed.  If the display
switches to an end message, the setting is completed.

Summary of Contents for ETERNUS LT160















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands