Fujitsu ETERNUS LT160, User Manual

Page: 116 / 238

Operator Panel Operation
4-30 C144-E072-01EN
Remarks:
If the Fabric connection is selected, the mode is set automatically.
- To set the LOOP ID directly, select the [Hard Address] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#2
-FC-AL
+Hard Address
- To set the LOOP ID automatically, select the [Soft Address] button.
SETUP menu
-Host I/F
-Target ID
-Adapter#2
-FC-AL
+Soft Address
6) If "Hard Address" is set, specify the LOOP ID.
Select the [Ten Key] icon and then enter a LOOP ID using the ten-key pad.
The range of LOOP ID value is as follows:
LOOP ID: 0 - 125 (decimal)
If the entry is completed, select the [OK] button.
Figure 4.23 LOOP ID setup window of the host
Ten key button