75
Error Message List
Error
Code
Error
Message
Reason Solution
• Dust or dirt is on the
fiber surface.
•Completely prepare the fiber again
(strip, clean and cleave).
• Dust or dirt is on the
objective lens or the
wind protector mirror.
• Execute the [Dust Check]. Clean
the lens or the mirror if dust or dirt
exists.
01
L-Too Dusty
Fiber
• [Cleaning Arc] time is
too short or “OFF.”
• Set the [Cleaning Arc] time to
“30ms.” When splicing carbon
coated fibers, set to “100ms.”
• Splicing indistinct core
fibers with the SM or
DS modes.
• Use the MM mode to splice
indistinct core fibers (i.e. MM
fiber).
• [Align] is set to “Core”
to splice indistinct core
fibers when using other
splice modes.
• Set [Align] to “Clad” to splice
indistinct core fibers (i.e. MM
fiber).
03
02
R-Too Dusty
Fiber
• [Focus] is incorrectly
set when using other
splice modes.
• Set [Focus] to “Edge” to splice
indistinct core fibers (i.e. MM
fiber). To splice distinct core
fibers, “Auto” or the correct focus
value should be entered.
Summary of Contents for FSM-50S
Page 2: ......
Page 55: ...51 Splice Menu BLANK PAGE ...