63
Management Menu
2.
Power Save
This function is important for energy conservation. If the power saving function is not
set during battery pack use, the number of splice cycles will be decreased. The splicer
automatically identifies the type of power supply unit. In addition, it can program an
independent power saving setting. Utilizing these features enables automatic turning on
or off of the power saving function after detecting the power supply units.
Setting Power Save
(1) Insert a power unit and turn splicer
power on.
(2) Select [Power Save] in the
[Management Menu]. [Power Save] is
displayed for the type of power supply
used.
(3) Change value of [Monitor Shut Down]
and [Splicer Shut Down].
Parameter Descriptions
Power Source Type
The type of power supply identified (used).
Monitor Shut Down
Setting this function turns off the power supply to the LCD
monitor if the splicer performs no operation after a certain
period of time. Always set this function to a specific
shutdown time when using the battery pack.
When the power supply to the LCD monitor turns off, the
LED near the key blinks. Pressing any key turns on the
LCD monitor.
Splicer Shut Down
Automatically turns off the power supply to the splicer if it
performs no operation for a certain period of time. The
function serves to prevent the battery capacity from running
low if the splicer is left on for an extended period of time.
• The value can be changed for
power unit used
Power Save Menu
Select the [Power Save] in
the [Management Menu]
Summary of Contents for FSM-50S
Page 2: ......
Page 55: ...51 Splice Menu BLANK PAGE ...
