24
Basic Operation
Storing splicing results
Splicing results can be stored in memory. Follow the storing procedure below.
Storing results automatically (No comment is inputted)
The splicing result is automatically stored in memory when
SET
or
RESET
is
pressed upon completion of the splice at the [Finish] screen, or when the wind
protector is opened upon completion of the splice at the [Finish] screen.
Once a certain comment is inputted, the same comment is inputted into subsequent
splice results. To change comments, see next paragraph.
Storing results with some comments
Press at [Finish] screen upon completion of the splice to display [Memory
Storage Menu]. Move cursor to [Storage/Comment Input] and press to display
[Input Comment] screen, then input comment. Press
SET
,
RESET
or open wind
protector at the [Finish] screen to store splicing results with some comments.
No storing splicing results
Press at the [Finish] screen upon completion of the splice to display [Memory
Storage Menu]. Move cursor to [Memory Storage Cancel] and press to enter. No
splicing results are stored even though
SET
or
RESET
is pressed, or wind
protector is opened at the [Finish] screen upon completion of the splice.
• [Memory Storage Cancel] function can be set to "disabled". See
[Management Menu] (Page 52) for details.
• After the 2000th result is stored, 2001st splice result is written over 1st result.
Summary of Contents for FSM-50S
Page 2: ......
Page 55: ...51 Splice Menu BLANK PAGE ...
