74
Error Message List
Press when an error is shown on the monitor. The [HELP] screen displays the
following:
• If error does not have an error code, such as “Cleave Shape NG”, the keystrokes are
displayed with information explaining what each keystroke does if pressed.
• If error has an error code, additional information according to the Error Code and
Message is displayed.
Follow the solution precisely as shown in the list below. If it is not possible to eliminate
the problem, the splicer may require service by a qualified service center. Consult your
nearest sales agency with the following information:
• Model name of the splicer
• Serial number of the splicer
• Error message
• Error code (if shown)
• Situation when the error occurs
Error
Code
Error
Message
Reason Solution
01
L-Too Long
Fiber
• The fiber end-face is
placed on the electrode
centerline, or beyond
it.
• Press
RESET
, and set the fiber
end-face between the electrode
centerline and the V-groove edge.
02
R-Too Long
Fiber
• The cleave length (bare
fiber part) is too long.
• Confirm the setting position of the
stripped fiber end on the fiber
cleaver. Check the cleave length.
01
03
LR-Too Long
Fiber
• Dust or dirt is on the
objective lens or the
wind protector mirror.
• Execute the [Dust Check]. Clean
the lens or the mirror when dust or
dirt exists.
01
X-Dark
BackGround
02
Y-Dark
BackGround
Dust or dirt is on the
objective lens or the
wind protector mirror.
Execute the [Dust Check]. Clean
the lens or the mirror if dust or dirt
exists.
11
X-Dark
BackGround
02
12
Y-Dark
BackGround
The LED or Camera
might be damaged.
Consult your nearest sales agency.
Summary of Contents for FSM-50S
Page 2: ......
Page 55: ...51 Splice Menu BLANK PAGE ...
