55
Splice Menu
Parameter Description
Ignore Splice Error
Cleave
Setting to “Disable” prevents the splicer from continuing a splice
even if the message “Cleave Angle Error” is disregarded.
Core Angle
Loss
Bubble
Fat
Thin
Setting to “Disable” prevents the splicer from normally finishing
its operation even if the message “Loss Error,” “Core Angle
Error,” “Bubble Error,” “Fat Error” or “Thin Error” is
disregarded.
Arc Compensation
Pressure
Temperature
Setting to “OFF” turns off arc power compensation by pressure
and temperature changes.
Fiber Image on Screen
Gapset
Pause1
Align
Pause2
Arc
Estimate
Sets the method of displaying the fiber image on the screen
during
splicing operation.
X
: Enlarged display of X-axis image
Y
: Enlarged display of Y-axis image
X
▲▼
Y : Composite display vertically of X-axis and Y-axis
images
X
◄►
Y : Composite display horizontally of X-axis and
Y-axis images
X
►
Y
: Change from Y-axis enlarged image to X-axis
enlarged image during operation
Y
►
X
: Change from Y-axis enlarged image to X-axis
enlarged image during operation
Fiber Image on Screen
Auto Fiber
Forward
If “Auto Fiber Forward” is set to “ON”, fibers are automatically
moved closer to gapset as soon as wind protector is closed.
Cleave Shape
Error
Error message is displayed if the cleaved end face of either left
or right fiber exceeds the selected threshold (cleave shape).
Realign after
Pause2
After a long time in the [PAUSE2] state, alignment may be lost.
Therefore, the splicer performs the realigning function after the
end of [PAUSE2] state. Setting this function to “OFF” prevents
the realignment function. When splicing fibers and making axial
offset at [PAUSE2], it is recommended to use the manual splice
mode instead of setting this function to “OFF.”
Max. Number of
Rearcs
The re-arcing process sometimes improves the splice loss, but
sometimes worsens it. Re-arcing decreases the splice strength.
With this function, it is possible to limit the number of re-arcs or
to disable re-arc discharge.
Summary of Contents for FSM-50S
Page 2: ......
Page 55: ...51 Splice Menu BLANK PAGE ...