76
Splice Mode
The optimum splice setting for a specific fiber combination consists of the splicing
parameters listed below. In other words, the optimum splicing parameters depend on
the fiber combinations and are different from fiber to fiber.
Parameters for controlling arc discharge / heating.
Parameters for calculating estimated splice loss.
Parameters for controlling fiber alignment and splicing procedures.
Threshold for error messages.
A series of optimum splice parameters for major fiber combinations are already
stored. These parameters are stored in the database area and can be copied to the
user-programmable area. These splice parameters can be edited for a specific
fiber combination. When the [Fiber Type] is selected from the splice setting of
“Database area”, the factory default settings are overwritten on the splice mode
being edited. When operating Mode is selected and it changes to Full, Basic, and
Fiber Shaping displayed menu composition changes. When you want to do a
detailed setting select [Full] mode.
Display the Splice Mode
Select the area which
you want create
Display the data base when
fiber type is selected