100
Splice Mode
[Special Function]
Parameter
Description
Pause ([Pause] selected as [Preceding Action] or [Next Action])
Pause
The [Pause] function may be selected as a [Preceding Action] at the
beginning of a step or as a [Next Action] at the end of a step. At [Pause],
pressing the HELP key will display the [Pause] menu showing options
for next operations as shown.
Press SET key: [Continue] →
Operation will
continue. If [Pause] is a [Preceding Action] at the
beginning of a step, operation will continue with
that step. If [Pause] is a [Next Action] at the end of a
step, operation will proceed to the next step, or it
will be finished if there is no next step in the Special
Function process.
Press ARC key: [Return to Step 1] →
The
operation will jump back to the beginning of Step 1
of the Special Function process.
Press ENT key: [Jump to] →
A new screen is
opened to offer options to jump to any desired step
in the Special Function process.
See details below.
Press ESC key: [Finish] →
The Special Function
process is terminated, even if there are other steps
not yet completed.
NOTE:
It is not necessary to display the [Pause] menu to navigate to the
[Jump to] screen. As soon as {Pause} is reached
ENT
will access [Jump to].
Jump to
When the [Pause] state is reached during Special Function operation,
pressing the ENT key opens the [Jump to] selection dialog screen. This
enables selection of any step in the Special Function process sequence
as the next operation.
The [Jump to] selection dialog screen will
display the present step number and basic
settings. To “Jump to” this step and proceed,
press the ENT key.
To navigate to another step in the Special
Function process, press the Right key to display
a higher step number, or press the Left key to
display a lower step number. Once the desired
step is shown, press the ENT key to “Jump to”
this step.
Press the ESC key to terminate the Special
Function process.
[Pause] Menu
[Jump to] Screen