3-16
897N203029A FDC NX600 Instruction Manual 2022.01
3 Measurement
< Buttons of the measurement results screen >
1
3
4
5
6
9
a
9
2
8
0
7
NOTE
When the past test results are dis-
played, the results are displayed just as
they were obtained using the settings
when they were measured, such as Unit
conversion, Correlation coefficients,
Reference interval range, Test item
name. The test results sent by the [Send]
button have also the same format.
1
button
Close the measurement results screen, and
then return to the Measurement-preparation
screen.
2
Change sample No. button
Change the sample number for which meas-
urement results are to be displayed.
3
Feed button
Feed the recording paper with a fixed
amount.
4
Print button
Print all measurement results of the dis-
played sample.
5
Send button
Send the measurement results of the dis-
played sample to a PC (via DMS).
6
Retest button
Perform the measurement again under the
same conditions for sample number, sample
ID, reference standard, and sample type.
Only the dilution factor can be changed.
7
Result data scroll button
Change the display of the measurement re-
sult data of the slide.
8
Sample No. tab
Tap to display the measurement results of
the selected sample number.
9
Sample No. tab scroll button
Change the display of the Sample No. tab.
This button is available when five or more
samples have been measured.
0
Date scroll button
Change the measurement date.
a
Display calendar button
Display the calendar. If a date within the cal-
endar is tapped, the measurement results of
that day are displayed.
Refer to the next page.
3
