9-8
897N203029A FDC NX600 Instruction Manual 2022.01
9 Function Menu
9.2.1 Date & Time Settings
This mode is used to set the date and time settings stored in the memory.
• Tap “
” or “
” to change the date and time
values.
•
Configure the order of the year, month, and date
by using [Date format setting].
NOTE
The analyzer must be restarted to enable
a change of [Date format setting].
The confirmation dialog for the power-
off will appear when
is tapped to
exit Normal mode. After the shutdown,
reboot the analyzer.
9.2.2 Brightness • Volume
You can configure the brightness of the LCD and buzzer sounds (error warning, measurement com
-
pleted).
•
Configure the brightness of the LCD using
[Display brightness]. Use
and
to set the
minimum and maximum brightness.
•
Configure the buzzer sound when an error oc
-
curs by using [Error sound]. Use
and
to
set the minimum and maximum.
•
Configure the buzzer sound when measurement
ends by using [Other general sound]. Use
and
to set the minimum and maximum. If
is configured, the buzzer is muted.
9
