FujiFilm EP-6000, Service Manual

Page: 177 / 445

SS1807-N002 Failure Analysi
－
36/64
Display
error
code
Classification
level Display message
(occurrence, response)
Display message
(guidance to
error)
Estimated cause Trigger of message display Service response
9020 Warning
Some image files are not
yet transferred.
Transfer these files to
Storage server again?
Under the setting for non-use of
media storage at transfer during
capture, communication failure to
the storage server occurred, and
transfer of all the image files was
not completed. Under this
condition, examination
termination was executed.
Same as on the left
Dialog selection→
(1) Check connection to the
storage server, and select
“Transfer.”
(2) If it is safe to delete the image
files, select “Delete.”
In case of repetitive failures,
check the network cable and the
network device
9021 Warning
Could not send
termination notification of
MPPS.
Send it again?
Communication failure to MPPS
server
Same as on the left
Check network connection and
setting.
9022 Warning Obtaining worklist failed.
Cause: MWM
server is not
connected to the
network or
network setting is
incorrect.
The server is not connected to
the network or something wrong
with network setting
Same as on the left
Check network connection and
setting.
9023 Warning
Communication with
Storage server is not
established.
Create image file?
Cause: Storage
server is not
connected to the
network, or
network setting is
incorrect.
The server is not connected to
the network or something wrong
with network setting
When an event of examination
start preparation was received Check network connection and
setting.
9024 Information
Transferring image files to
Storage server.
Please wait for a while.
Image transfer when examination
is finished.
When storage transfer was
performed when examination
was finished.
Nothing special
9025 Information
Creating DICOMDIR file
succeeded.
When writing of the DICOMDIR
index file to the external memory
is successful.
Same as on the left
9026 Information
Deleting DICOM files.
Please wait for a while. Automatic deletion when
examination is finished. When auto deletion is performed
at the time of examination end
Nothing special
9027 Information
Number of shots during
examination is limited.
Note that shooting may
be disabled during
examination.
To release the
limit, enable
external memory
backup function
and insert external
memory.
Inspection was started while not
saving to the external memory
during batch transfer.
Same as on the left Review DICOM setting for users.
9028 Information
Exporting DICOMDIR is
not executed because no
DICOM images exist. Cause: No DICOM
files exist in
Internal Memory. A DICOM file was exported while
no DICOM file was saved on the
external memory.
Same as on the left Nothing special